Simple Select products now available as part of the QuickShip Program (ships from our facility in 1 week or less).
HepcoMotion Simple Select offers complete vee slide linear guidance systems in four useful sizes. Systems include the linear guide track and wheel plate carriage assemblies pre-installed and adjusted. All units are fitted with double row bearings and cap seals to ensure a long and trouble-free life. The general purpose spacer slide is precision cold drawn and hardened on the vee running surfaces to provide good accuracy and long service life, even in the most hostile environments. Specifying could not be easier. Simply check the load to be carried against the carriage load capacities and check that the physical size meets your requirements.
Simple Select utilizes proven Hepco vee slide technology and is ideal for high speed and short stroke movements. The guide track can be fitted to unmachined surfaces if required and is great for attaching to extruded aluminum profiles. The design enables short installation time because the linear bearing carriage is assembled and adjusted to the linear track. Simply mount the track with fasteners, and attach your load to the carriage. The carriage features double row ball bearing guide wheels for long and trouble free life. The wheels are covered and protected by cap seal wipers which prevent dirt ingress and ensure constant positive lubrication.
The vee slides are made from AISI 52100 high carbon bearing grade steel with the vee faces are hardened for wear resistance to 58-62 Rockwell C scale. They are finished in chemical black and provided with mounting hole blanking plugs.
The wheel plate carriages are made from high strength aluminum alloy and are finished in black anodize. They feature pre-mounted and adjusted linear guide bearings with cap seals. The cap seal wheel covers are made from impact resistant thermoplastic elastomer and hold lubricating felt wipers to push debris aside and to apply a light film of lubricating oil. The wheel plate carriage is high speed capable and has a maximum linear speed of 8 m/s when used with a lubricated vee slide.
Simple Select and HepcoMotion are registered trademarks of Hepco Slide Systems Limited. All rights reserved.
Most applications involve central L1 loads. In these cases simply divide your load (N) by the carriage L1 capacity figure to determine a load factor. Then simply read off the line from the graph. For offset loads you will ned to add the relevant load factors to determine the total. Load Factor should not exceed 1.
VASCULAR GRAFTING MATERIAL
Smooth-Running Actuated Solution for Vascular Grafting
Build a system that could accurately control the winding of vascular grafting material within precise limits at a slow speed. Proper winding is critical to ensure the material functions correctly following surgery.